AWCReadyPrepare a certification →
D-1 (25)operating limitation

FAA Order 8130.2M — Operating Limitation 25

Appendix D · Table D-1 · p. p178

The aircraft may not be operated unless the replacement interval for a life-limited article, as defined in § 43.10(a), specified in the applicable technical publications pertaining to the aircraft, and its articles are complied with in one of the following manners:(a)Type-certificated or previously type- certificated products: Replacement of life-limited parts required by § 91.409(e) applies to experimental aircraft when the required replacement times are specified in the aircraft specifications, type certificate data sheets or other documents approved by the Administrator.(b)Non-type-certificated products: Comply with intervals for replacing life-limited parts or articles in accordance with the manufacturer’s maintenance procedures or FAA-approved inspection program.

Verify it yourself: the eyeball above opens the exact page of Order 8130.2M with this limitation highlighted.

Does this one apply to your aircraft?

AWCReady decides limitation 25 for you — from the aircraft and the 14 CFR 21.191 purpose.

Not every limitation goes on every aircraft. AWCReady gates each one against the airframe’s attributes and certification basis, asks only the questions that matter in plain language, and assembles a review-ready package.

See if it applies →
← All 8130.2M operating limitations

This is a free reference reproducing public-domain text from FAA Order 8130.2M (the MOSAIC revision that superseded 8130.2L). AWCReady is not affiliated with or endorsed by the FAA. The limitations an aircraft actually receives are prescribed by the FAA on FAA Form 8130-7 — AWCReady prepares and organizes; the FAA determines every outcome.