D-1 (33)operating limitation

FAA Order 8130.2M — Operating Limitation 33

Appendix D · Table D-1 · p. p181

Compliance with all the manufacturers operating limitations (e.g., POH, light-sport AOI, aircraft flight manual, military manual), placards, and markings is required unless exceedance of a limitation is required for flight testing that was described in the program letter used as the basis for this airworthiness certificate. Intentional exceedance of a limitation that was not described in the program letter is prohibited. Intentional exceedance of a manufacturer limitation described in the program letter requires compliance with the operating limitation related to major changes appended to this airworthiness certificate, except that notification to the responsible flight standards office is not required.

Verify it yourself: the eyeball above opens the exact page of Order 8130.2M with this limitation highlighted.

Does this one apply to your aircraft?

AWCReady decides limitation 33 for you — from the aircraft and the 14 CFR 21.191 purpose.

Not every limitation goes on every aircraft. AWCReady gates each one against the airframe’s attributes and certification basis, asks only the questions that matter in plain language, and assembles a review-ready package.

See if it applies →

← All 8130.2M operating limitations

This is a free reference reproducing public-domain text from FAA Order 8130.2M (the MOSAIC revision that superseded 8130.2L). AWCReady is not affiliated with or endorsed by the FAA. The limitations an aircraft actually receives are prescribed by the FAA on FAA Form 8130-7 — AWCReady prepares and organizes; the FAA determines every outcome.